Datasheet
Networking
10Gb/s 850nm Multimode Datacom SFP+ Transceiver
These transceivers are compliant with SFF-8431, IEEE 802.3-2012 10GBASE-SR/SW and 1000BASE-SX3. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF_x005F_xFFFE_84724. TheFTLX8574D3BTL is a “limiting module”, i.e., it employs a limiting receiver.
Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperability with an SFP+ limiting module. The optical transceiver is compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details. For details of our compliance standards, click here.
Datasheet
| Parameter | FTLX8574D3BTL |
|---|---|
| Operating Distance | 300 m |
| Data Rate | 10.5 Gb/s |
| Data Transfer Rate | 10G |
| Protocol | Wireless CPRI Compliant |
| Connector | Duplex LC |
| Media Type | OM4 MMF |
| Form Factor | SFP+ |
| Low End Case Temperature (ºC) | -5 °C |
| Voltage Supply (V) | 3.3 V |
| Diagnostics | digital |
| High End Case Temperature (ºC) | 70 °C |
| Wavelength (nm) | 850 nm |
| Transmitter | 850 nm VCSEL |
| Receiver | Limiting Electrical Interface |