Datasheet
Diode Lasers
Fiber-Coupled Tailored Mini-Bars
Through the optimization of semiconductor chip structures and optical parameters, Coherent T-Bar architecture delivers high beam quality and high power using standard micro-optics, all assembled with automated processes. The tailored bar-based products are available at 6xx nm, 793 nm and 9xx nm, with power levels from 40 W up to 2 kW.
Features
- Conduction-cooled diode laser bars inside
- Single wavelength
- High coupling efficiency
- Scalable output power
- Industrial water cooling
- Integrated pointer laser and power meter
- Integrated NTC temperature sensor
- Fiber plug control
- Wavelength stabilization
Optional Accessories
- Center wavelength: 980 nm
- Output power: 400 W
- Spectral width (FWHM): ≤ 5 nm
- Fiber termination: SMA
Datasheet
| Parameter | MDL980FCTBAR400IS43.10SMAF202 |
|---|---|
| Package | Fiber-Coupled Tailored Mini-Bars |
| OPTICAL PARAMETERS1 | |
| Center Wavelength Range3 (nm) | 980 |
| Center Wavelength Tolerance3 (nm) | ±10 |
| Output Power2 (W) | 400 |
| Operating Condition | CW |
| Spectral Width (90% power content) (nm) | ≤5 |
| Slope Efficiency (W/A) | ≥14 |
| Numerical Aperture (NA) | 0.215 ±0.005 |
| FIBER PARAMETERS5 | |
| Fiber Core Diameter (μm) | 202 ±2 |
| Fiber Cladding Diameter (μm) | 242 ±2 (Modestrip) |
| Fiber Coating Diameter (μm) | 400 ±25 |
| Fiber Loose Tubing Diameter (mm) | 3 |
| Fiber Length (m) | 5 |
| Fiber Termination | SMA |
| ELECTRICAL PARAMETERS1 | |
| Power Conversion Efficiency (%) | ≥46 |
| Threshold Current (ITH) (A) | ≤4 |
| Operating Current (IOP) (A) | ≤35 |
| Operating Voltage (VOP) (V) | ≤30 |
| THERMAL PARAMETERS | |
| Operating Temperature Range2,3,4 (°C) | +20 to +25 |
| Coolant Temperature | +20 to +25 |
| Coolant Flow Rate | ≥300 |
| MECHANICAL PARAMETERS | |
| Size (mm3) [W x D x H] | See Drawing |
| Weight (kg) | ~ 4.4 |
| Purity | Tap Water |
Notes:
1.2 Data at 25°C cooling water temperature. [IS45 Red and all other wavelengths]
2. Reduced lifetime if used above nominal operating conditions.
3. Others available upon request.
4. A non-condensing environment is required for storage and operation below the ambient dew point.
5. It is essential for the module to work correctly that the cooling water temperature and flow rate are monitored as an interlock for interrupting the laser current immediately if a value exceeds or falls below the given parameter.
6. Non-detachable fiber.