Datasheet
Networking
10GBASE-SR/SW 400m SFP+ Extended Temperature Optical Transceiver
FTLX8574D3BNL Extended Temperature 10 Gb/s SFP+ transceivers are compliant with SFF-84311, SFF-84322, IEEE 802.3-2012 10GBASE-SR/SW3 and 10G Fibre Channel 1200-Mx-SN-I4. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-84725. The FTLX8574D3BNL is a limiting module i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer‚ as recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The optical transceiver is compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details. For details of our compliance standards, click here.
Datasheet
| Parameter | FTLX8574D3BNL |
|---|---|
| Operating Distance | 400 m |
| Data Transfer Rate | ≤10G |
| Form Factor | SFP+ |
| Receiver | PIN |
| Low End Case Temperature (ºC) | -5 °C |
| High End Case Temperature (ºC) | 85 °C |
| Transmitter | VCSEL |
| Connector | LC |
| Media Type | Duplex MMF |
| Data Rate | 10.5 Gb/s |
| Protocol | CPRI Gigabit Ethernet Fibre Channel |
| Voltage Supply (V) | 3.3 V |
| Diagnostics | Digital |
| Wavelength (nm) | 850nm Band |