Conduction-cooled single bars are well introduced in the market and are an industry standard in terms of size and footprint. At Coherent, these laser bars are available in a very wide range of wavelengths and powers, with optional beam shaping such as fast-axis collimation, both-axis collimation, or even further focused to a defined spot size. Also available are options such as spectral locking and line narrowing, using Volume Bragg Gratings. (VBG)
Parameter | MDL808SB150M |
---|---|
Package | Conduction-Cooled Single Bar |
OPTICAL PARAMETERS1 | |
Center Wavelength Range3 (nm) | 808 |
Center Wavelength Tolerance3 (nm) | +/-3 |
Output Power2 (W) | 150w |
Number of Emitters | 47 |
Emitter Size (µm) | 100 |
Fill Factor (%) | 50 |
Operating Condition | QCW |
Spectral Width (FWHM) (nm) | ≤5 |
Slope Efficiency (W/A) | ≥1.20 |
Fast-Axis Divergence without Optics (90%) (degree) | ≤65 |
Fast-Axis Divergence with Fast-Axis Collimation (mrad) | ≤8 |
Slow-Axis Divergence (90%) (degree) | ≤9 |
Wavelength Temp. Coefficient (nm/°C) | ~0.27 |
Beam Geometry after FAC Lens (mm x mm) | ~0.8 x 10 |
ELECTRICAL PARAMETERS1 | |
Power Conversion Efficiency (%) | ≥57 |
Threshold Current (ITH) (A) | ≤20 |
Operating Current (IOP) (A) | ≤150 |
Operating Voltage (VOP) (V) | ≤1.9 |
Duty Cycle5 (%) | ≤2 |
Pulse Length5 (µsec) | ≤500 |
THERMAL PARAMETERS1 | |
Operating Temperature Range3,4 (°C) | +20 to +30 |
Storage Temperature Range4 (°C) | 0 to +55 |
Recommended Heat Sink Capacity (W) | ≥20 |
Notes:
1. Data at 25°C cold plate temperature.
2. Reduced lifetime if used above nominal operating conditions.
3. Others available upon request.
4. A non-condensing environment is required for storage and operation below the ambient dew point.
5. Custom pulse length / duty cycles on request.