The Coherent CM97A1064BFBG next generation wavelength stabilized high power single mode laser module has been designed as a light source for pulsed fiber laser applications. Processes and techniques of coupling the fiber to the laser allow high kink free peak output powers that are very stable with both time and temperature. An ultra broad bandwidth grating enables a controlled broad spectrum that helps to suppress SBS generation in pulsed fiber lasers.
Parameter | CM97A1064BFBG |
---|---|
Package | 10-pin Butterfly |
Operating Condition | Pulsed |
CW Electrical and Optical Specification1 | |
Threshold Current (mA) | 60 (typ.), 40 (min.), 80 (max.) |
Operating Forward Current (A) | 1.1 (max.) |
Operating Power (mW) | 650 (typ.), 550 (min.) |
Operating Forward Voltage (V) | 1.7 (typ.), 2.5 (max.) |
Polarization Extinction Ratio (dB) | 13 (typ.) |
PULSED SPECIFICATIONS | |
Output Power (W) | 1.4 (typ.), 1.2 (min.), peak power2 |
Operating Peak Current2 (A) | 2.2 (max.) |
Center Wavelength (Centroid) (nm) | 1064 (typ.) |
Center Wavelength Range (nm) | 1050 - 1075 |
Spectral Width FWHM (nm) | 1-2 (typ.), 4 (max.) |
Pulse Width (ns) | 5 (min.), 500 (max.) |
Repetition Rate (kHz) | 500 (max.) |
Duty Cycle (%) | 5 |
Rise Time (ns) | 1.6 (max.) |
Package | |
Monitor Detector Responsivity (µA/mW) | 0.5 - 40 |
Monitor Dark Current (nA) | 50 (max.) |
Thermistor Resistance (at 25°C) (kOhm) | 10 (typ.), 9 (min.). 11 (max.) |
TEC Current (∆T = 35 °C, If = If max) (A) | 1.5 (max.) |
TEC Voltage (∆T = 35 °C, If = If max) (V) | 3.0 (max.) |
ABSOLUTE MAXIMUM RATINGS3 | |
Package | |
Storage Temperature (°C) | -40–85 |
Lead Soldering Temperature (10s max) (°C) | 350 (max.) |
TEC Current (A) | -2.2 to 2.2 |
TEC Voltage (V) | -3.3 to 3.3 |
Laser | |
Laser Forward Current (10s max) (mA) | 1500 (max.) |
Laser Reverse Voltage (V) | 2 (max.) |
Fiber Pigtail | |
Fiber Bend Radius (mm) | 20 (min.) |
Fiber Type | Polarization maintaining Nufern PM980-HP or equivalent (e.g. Fujikura SM98) |
Fiber Core Diameter (μm) | 6.6 |
Mode Field Diameter (µm) | 6.6 (typ.), 5.6 (min.), 7.6 (max.) |
Buffer Diameter (µm) | 250 (typ.), 230 (min.), 270 (max.) |
FBG Center to Fiber End (cm) | 70 (min.) |
Lens to FBG Center (cm) | 55 (typ.), 45 (min.), 65 (max.) |
Pristine Fiber Proof Test Level (kpsi) | 200 (min.) |
Fiber Pull to Housing (kpsi) | 150 (min.) |
Miscellaneous | |
RoHS Compliance | compliant (China RoHS 50) |
Laser Safety | Class 4 Laser Product |
Comment | Broadband FBG Manufactured in China |
Notes:
1. Conditions unless otherwise stated:
Case temperature -20 to +75°C, Submount temperature 25°C, Monitor diode bias: -5 V, CW operation
2. <500 ns / 500kHz
3. The absolute maximum ratings are conditions for which the device is expected to recover fully the specified performance. Exceeding these limits may impair the device reliability. The ratings apply to each parameter in isolation; that is when all other parameter have values within the relevant characteristics. It cannot be assumed that limiting values of more than one parameter may be applied to a device at the same time.