calcActive())">
Zinc Sulfide Multispectral (ZnS MS)
Build high-performance common aperture systems that operate across wavelengths ranging from 400 nm to 12 µm with minimal scatter and excellent mechanical properties.
- Part Number
- Zinc-Sulfide-Multispectral
- Product Type
- Bulk Optical Materials
Contact a product expert
Inquiry about Zinc Sulfide Multispectral (ZnS MS) (Zinc-Sulfide-Multispectral). A Coherent specialist will reach out within one business day.
* Required field
- Minimal scatter
- Excellent mechanical properties
- Hot isostatic press (HIP) treatment
- Crystal lattice defects virtually eliminated
- Water-clear material
- Sheet material
Description
Build high-performance common aperture systems that operate across wavelengths ranging from 400 nm to 12 µm with minimal scatter and excellent mechanical properties.Coherent ZnS multispectral is zinc sulfide material that is treated by a hot isostatic press (HIP) process. Under this intense heat and pressure, defects within the crystalline lattice are virtually eliminated resulting in a water-clear material.Zinc Sulfide Multispectral (ZnS MS) CharacteristicsCoherent routinely supplies ZnS MS substrates up to 300 mm, and can provide sheet material, core-drilled blanks, edged blanks, generated curved lens blanks, and more.
Specifications
Key technical parameters. For full electrical, optical and environmental ranges, refer to the datasheet.
| Refractive Index Inhomogeneity | <20 × 10⁻⁶ @ 0.6328 µm |
|---|---|
| Resistivity (Ohm-cm) | > 1012 |
| Maximum Substrate Diameter (mm) | 300 |
| Poisson's Ratio | 0.27 |
| Young’s Modulus (GPa) | 85.5 |
| Specific Heat (J/kg-K) | 527 |
| Product Type | Bulk Optical Materials |
| Spectral Range | 400 nm to 12 µm |
| Thermal Conductivity (W/m-K) | 27 |
| Thermal Expansion Coefficient (10⁻⁶/K) | 6.5 |
| Thermo-Optic Coefficient (10⁻⁶/K) | 54 @ 10.6 µm |
| Substrate Materials | Zinc Sulfide Multispectral (ZnS MS) |
| Crystal Structure | Cubic zincblende |
| Density (g/cc) | 4.09 |
| Applications | Common aperture systems |
| Bulk Absorption Coefficient (cm⁻¹) | <0.20 @ 10.6 µm |
| Knoop Hardness | 150 to 160 kg/mm² |
| Inclusions | None > 0.2 mm |
| Key Feature | Minimal scatter;Excellent mechanical properties;Hot isostatic press (HIP) treatment;Crystal lattice defects virtually eliminated;Water-clear material;Sheet material;Core-drilled blanks;Edged blanks;Generated curved lens blanks |
| Grain Size | 20 µm to 100 µm |
| Flexural Strength (MPa) | 68.9 |