calcActive())">
Passive Components
Tap Photodiodes (Tap PDs)
Enable network traffic monitoring by Integrating Coherent taps within standard transceiver packages (e.g., CFP2) thanks to their small (1.8 or 1.4 mm) diameter format.
- Part Number
- Tap-Photodiodes
- Product Type
- Passive Components
Contact a product expert
Inquiry about Tap Photodiodes (Tap PDs) (Tap-Photodiodes). A Coherent specialist will reach out within one business day.
* Required field
- High optical efficiency
- Low-noise photodiodes
- Standard and custom tap ratios
- Humidity up to 85% RH
- Compact diameter format
Description
Enable network traffic monitoring by Integrating these taps within standard transceiver packages (e.g., CFP2) thanks to the small (1.8 or 1.4 mm) diameter format.Our slim taps feature high optical efficiency and low-noise photodiodes optimized for C- or L-band use. Choose from standard tap ratios (1, 2, 5, 10, or 20%) or specify a custom ratio. They feature rugged operation over the temp. range 0 to 75°C and humidity to 85% RH.1.8 mm and 1.4 mm Tap PDsUse the table below to determine the optimum standard tap ratios for your application, or specify a custom ratio.
Specifications
Key technical parameters. For full electrical, optical and environmental ranges, refer to the datasheet.
| Responsivity Min. (A/W) | 0.008 @ 1%, 0.014 @ 2%, 0.040 @ 5%, 0.080 @ 10%, 0.120 @ 20% |
|---|---|
| Receiver | Photodiode |
| Responsivity Typ. (A/W) | 0.02 @ 1%, 0.025 @ 2%, 0.070 @ 5%, 0.14 @ 10%, 0.28 @ 20% |
| Product Type | Passive Components |
| Tap Ratio (%) | 1, 10, 2, 20, 5 |
| Applications | Network traffic monitoring;Transceiver integration |
| Insertion Loss (dB) | 0.45 @ 1%, 0.65 @ 2%, 1.2 @ 5%, 1.85 @ 10%, 2.0 @ 20% |
| Key Feature | High optical efficiency;Low-noise photodiodes;Standard and custom tap ratios;Humidity up to 85% RH;Compact diameter format |