Laser Measurement Instruments

BeamMaster-USB System BM-3 (InGaAs)

Knife-edge beam profiler; 3 mm circular with 3 knife edges; profiles beams down to 3 µm, InGaAs detector with 800 to 1800 nm spectral range.

Part Number
1224016

Contact a product expert

Inquiry about BeamMaster-USB System BM-3 (InGaAs) (1224016). A Coherent specialist will reach out within one business day.

* Required field

  • 3 knife edge beam scanning system
  • 3 mm square aperture
  • Enhanced Silicon detector
  • 800 to 1800 nm spectral range
  • 1 µm resolution for beams >100 µm in size
  • - 0.1 µm resolution for beams <100 µm in size

Description

Laser Beam Diagnostics system includes a knife-edge profiler, USB interface module, and beam diagnostics software.

BeamMaster-USB BM-3 InGaAs is a high-precision multiple knife-edge scanning laser beam profiler that can measure focused spots as small as 3 microns from 800 to 1800 nm. This model incorporates a 3 mm diameter InGaAs detector.

The BM-3 model uses three individual knife-edges on a rotating drum to scan the beam through three different axes in a single rotation. The beam shape and dimensions are calculated by combining data from the three scans to reconstruct a profile of the beam.

Specifications

Key technical parameters. For full electrical, optical and environmental ranges, refer to the datasheet.

Key Feature 3 knife edge beam scanning system;3 mm square aperture;Enhanced Silicon detector;800 to 1800 nm spectral range;1 µm resolution for beams >100 µm in size;- 0.1 µm resolution for beams <100 µm in size;Measures beam sizes down to 3 µm;CW operation only
Technical Specifications Active Area Size: 3 mm (diameter) Power Range: 10µW to 1W Active Area Diameter: 3 mm Recommended Beam Size: 15 microns to 2 mm Wavelength Range: 800 nm to 1800 nm Profiler Type: Knife-edge (CW Only) Wavelength Range (micrometers): .8 to 1.8 Beam Width Measurement Accuracy (%): ±2 Capture Modes: CW Lasers Only Position Measurement Resolution (micrometers): 1 Sensor Aperture: 3 mm circular Minimum Beam Size (micrometers): 15 Position Measurement Accuracy (micrometers): ±15 Beam Size Resolution: 1 µm for beams >100 µm in size (0.1 µm for beams <100 µm in size)