EnergyMax-USB J-25MB-HE Energy Sensor
USB-enabled, 850 µJ to 1J pulse energy sensor, rep. rate up to 1000 pps, MaxBlack coating with 0.19 to 12 µm spectral range, 25 mm diameter active area.
- Part Number
- 1191442
- Product Type
- Pulse Energy Sensors
Contact a product expert
Inquiry about EnergyMax-USB J-25MB-HE Energy Sensor (1191442). A Coherent specialist will reach out within one business day.
* Required field
- 190 nm to 12 µm spectral range
- 25 mm diameter active area
- 850 µJ to 1J energy range
- 1000 pps repetition rate operation
- Direct USB interface
- ISO 17025 accredited
Description
Pyroelectric energy sensor with MaxBlack coating for measuring laser pulses from 850 µJ to 1J at up to 1000 pps. Direct USB interface.
The EnergyMax-USB J-25MB-HE energy sensor is terminated in a USB cable that interfaces directly to a PC. A DB25 model (PN 1110746) is available.
A small heatsink (PN 1123430) and medium heatsink (PN 1123431) is available to extend the energy and repetition rates of EnergyMax sensors by increasing the average power capability.
Specifications
Key technical parameters. For full electrical, optical and environmental ranges, refer to the datasheet.
| Wavelength (μm) | 190 nm to 12 µm |
|---|---|
| Product Type | Pulse Energy Sensors |
| Active Area (mm) | 25 mm |
| Key Feature | 190 nm to 12 µm spectral range;25 mm diameter active area;850 µJ to 1J energy range;1000 pps repetition rate operation;Direct USB interface;ISO 17025 accredited |
| Technical Specifications | Cable Type: USB Detector Coating: MaxBlack Energy Range: 850 µJ to 1J Wavelength Range: 190 nm to 12 µm Noise Equivalent Energy: <85 µJ Wavelength Range (micrometers): 0.19 to 12 Maximum Average Power (watts): 5 Maximum Pulse Width (microseconds): 17 Maximum Energy Density (millijoules per square centimeter): 500 (at 1064 nm, 10 ns) Diffuser: No Calibration Uncertainty (%)(k=2): ±2 Energy Linearity (%): ±3 Calibration Wavelength (nanometers): 1064 Cable Length (meters): 3 |