EnergyMax-USB J-50MB-IR Energy Sensor
USB-enabled, 3.2 mJ to 3J pulse energy sensor, rep. rate up to 30 pps, 0.5 to 3.0 µm spectral range, 30 mm diameter maximum beam size.
- Part Number
- 1191440
- Product Type
- Pulse Energy Sensors
Contact a product expert
Inquiry about EnergyMax-USB J-50MB-IR Energy Sensor (1191440). A Coherent specialist will reach out within one business day.
* Required field
- 500 nm to 3.0 µm spectral range
- 35 mm diameter active area
- 3.2 mJ to 3J energy range
- 30 pps repetition rate operation
- Direct USB interface
- ISO 17025 accredited
Description
Pyroelectric energy sensor with MaxBlack coating and diffuser for measuring laser pulses from 3.2 mJ to 3J at up to 30 pps. Direct USB interface.
The J-50MB-IR energy sensor is specifically design for high energy and high peak power Erbium and Holmium medical lasers. This sensor is like the J-50MB-YAG, but is designed to operate further in the infrared.
The EnergyMax-USB J-50MB-IR energy sensor is terminated in a USB cable that interfaces directly to a PC. A DB25 model (PN 1155722) is available.
A large heatsink (PN 1123432) is available to extend the energy and repetition rates of EnergyMax sensors by increasing the average power capability.
Specifications
Key technical parameters. For full electrical, optical and environmental ranges, refer to the datasheet.
| Wavelength (μm) | 500 nm to 3 µm |
|---|---|
| Product Type | Pulse Energy Sensors |
| Active Area (mm) | 50 mm |
| Key Feature | 500 nm to 3.0 µm spectral range;35 mm diameter active area;3.2 mJ to 3J energy range;30 pps repetition rate operation;Direct USB interface;ISO 17025 accredited |
| Technical Specifications | Cable Type: USB Detector Coating: MaxBlack Energy Range: 3.2 mJ to 3J Wavelength Range: 500 nm to 3 µm Noise Equivalent Energy: <320 µJ Maximum Pyroelectric Rep. Rate (pulses per second): 30 Wavelength Range (micrometers): 0.5 to 3.0 Maximum Average Power (watts): 15 Maximum Pulse Width (microseconds): 1000 Maximum Energy Density (millijoules per square centimeter): >100 (at 2940 nm, 100 μs) Diffuser: IR Calibration Uncertainty (%)(k=2): ±2 at 1064 nm, ±3 at 2940 nm Energy Linearity (%): ±3.5 Calibration Wavelength (nanometers): 1064, 2940 Cable Length (meters): 3 Maximum Beam Size (millimeters): 30mm |