Laser Measurement Instruments

EnergyMax-RS J-10MB-LE Energy Sensor

RS232-enabled, 10mm diameter pulse energy sensor with MaxBlack coating for measuring 500nJ-600µJ up to 1 kHz

Part Number
1191428
Product Type
Pulse Energy Sensors

Contact a product expert

Inquiry about EnergyMax-RS J-10MB-LE Energy Sensor (1191428). A Coherent specialist will reach out within one business day.

* Required field

  • 190 nm to 12 µm spectral range
  • 10 mm diameter active area
  • 500nJ-600µJ energy range
  • 1000 pps repetition rate operation
  • Direct RS232 interface
  • ISO 17025 accredited

Description

Pyroelectric energy sensor with MaxBlack coating for measuring laser pulses from 500nJ-600µJ at up to 1000 pps. Direct RS232 interface.

The EnergyMax-RS J-10MB-LE energy sensor is terminated in an RS232 cable that interfaces directly to a PC or industrial controller. Power must be provided via a 5VDC power supply (optional PN 1105557) or via Pin 1. A DB25 model (PN 1110855) is available.

Specifications

Key technical parameters. For full electrical, optical and environmental ranges, refer to the datasheet.

Pulse Repetition Rate 1000 Hz
Wavelength (μm) 190 nm to 12 µm
Product Type Pulse Energy Sensors
Active Area (mm) 10 mm
Key Feature 190 nm to 12 µm spectral range;10 mm diameter active area;500nJ-600µJ energy range;1000 pps repetition rate operation;Direct RS232 interface;ISO 17025 accredited
Technical Specifications Cable Type: RS232 Detector Coating: MaxBlack Energy Range: 500 nJ to 600 µJ Wavelength Range: 190 nm to 12 µm Noise Equivalent Energy: <50 nJ Maximum Pyroelectric Rep. Rate (pulses per second): 1000 Wavelength Range (micrometers): 0.19 to 12 Maximum Average Power (watts): 4 Maximum Pulse Width (microseconds): 17 Maximum Energy Density (millijoules per square centimeter): 500 (at 1064 nm, 10 ns) Diffuser: No Calibration Uncertainty (%)(k=2): ±2 Energy Linearity (%): ±3 Calibration Wavelength (nanometers): 1064 Cable Length (meters): --