Laser Measurement Instruments

J-50MUV-248 w/o Diffuser Energy Sensor

500 µJ to 1J pulse energy sensor, rep. rate up to 200 pps, 0.19 to 2.1 µm spectral range, 50 mm diameter active area.

Part Number
1146243
Product Type
Pulse Energy Sensors

Contact a product expert

Inquiry about J-50MUV-248 w/o Diffuser Energy Sensor (1146243). A Coherent specialist will reach out within one business day.

* Required field

  • 19 to 2.1 µm spectral range
  • 50 mm active area diameter
  • 500 µJ to 1J energy range
  • 200 pps repetition rate operation
  • ISO 17025 accredited

Description

Pyroelectric energy sensor with MaxUV coating for measuring laser pulses from 500 µJ to 1J at up to 200 pps.

This J-50MUV-248 energy sensor incorporates the MaxUV coating and is optimized for use with ArF lasers operating at 193 nm and KrF lasers at 248 nm. This sensor is directly calibrated at 248 nm and includes spectral compensation from 193 nm to 2.1 µm. It is terminated in a SmartProbe DB25 cable and is directly compatible with FieldMaxII-TOP, FieldMaxII-P, LabMax-TOP, and LabMax-Pro SSIM meters.

A large heatsink (PN 1123432) is available to extend the energy and repetition rates of EnergyMax sensors by increasing the average power capability.

Specifications

Key technical parameters. For full electrical, optical and environmental ranges, refer to the datasheet.

Pulse Repetition Rate 200 Hz
Product Type Pulse Energy Sensors
Active Area (mm) 50 mm
Key Feature 19 to 2.1 µm spectral range;50 mm active area diameter;500 µJ to 1J energy range;200 pps repetition rate operation;ISO 17025 accredited
Technical Specifications Cable Type: J DB-25 Detector Coating: MaxUV Energy Range: 500 µJ to 1J Wavelength Range: 190 nm to 2100 nm Noise Equivalent Energy: <16 µJ Maximum Pyroelectric Rep. Rate (pulses per second): 200 Maximum Average Power (watts): 10 Maximum Pulse Width (microseconds): 86 Maximum Energy Density (millijoules per square centimeter): 260 (at 248 nm, 10 ns) Maximum Energy Density (millijoules per square centimeter): 200 (@ 193nm, 10ns) Diffuser: No Calibration Uncertainty (%)(k=2): ±3 Energy Linearity (%): ±3 Calibration Wavelength (nanometers): 248 Cable Length (meters): 2.5