J-50MB-LE Energy Sensor
250 µJ to 500mJ pulse energy sensor, rep. rate up to 300 pps, MaxBlack coating with 0.19 to 12 µm spectral range, 50 mm diameter active area.
- Part Number
- 1110576
- Product Type
- Pulse Energy Sensors
Contact a product expert
Inquiry about J-50MB-LE Energy Sensor (1110576). A Coherent specialist will reach out within one business day.
* Required field
- 190 nm to 12 µm spectral range
- 50mm diameter active area
- 250 µJ to 500mJ energy range
- 300 pps repetition rate operation
- ISO 17025 accredited
Description
Pyroelectric energy sensor with MaxBlack coating for measuring laser pulses from 250 µJ to 500mJ at up to 300 pps.
The J-50MB-LE energy sensor is terminated in a SmartProbe DB25 cable and is directly compatible with FieldMaxII-TOP, FieldMaxII-P, LabMax-TOP, and LabMax-Pro SSIM meters.
A USB-direct (PN 1191443) model is available.
A large heatsink (PN 1123432) is available to extend the energy and repetition rates of EnergyMax sensors by increasing the average power capability.
Specifications
Key technical parameters. For full electrical, optical and environmental ranges, refer to the datasheet.
| Wavelength (μm) | 190 nm to 12 µm |
|---|---|
| Product Type | Pulse Energy Sensors |
| Active Area (mm) | 50 mm |
| Key Feature | 190 nm to 12 µm spectral range;50mm diameter active area;250 µJ to 500mJ energy range;300 pps repetition rate operation;ISO 17025 accredited |
| Technical Specifications | Cable Type: J DB-25 Detector Coating: MaxBlack Energy Range: 250 µJ - 500 mJ Wavelength Range: 190 nm to 12 µm Noise Equivalent Energy: <8 µJ Wavelength Range (micrometers): 0.19-12 Maximum Average Power (watts): 10 Maximum Pulse Width (microseconds): 57 Maximum Energy Density (millijoules per square centimeter): 500 (@1064nm, 10ns) Diffuser: No Calibration Uncertainty (%)(k=2): ±2 Energy Linearity (%): ±3 Calibration Wavelength (nanometers): 1064 Cable Length (meters): 2.5 |