Laser Measurement Instruments

J-50MT-10KHZ Energy Sensor

500 µJ - 1J pulse energy sensor, rep. rate up to 10000 pps, metallic coating with 0.19 to 2.1 µm spectral range, 50 mm diameter active area.

Part Number
1110574
Product Type
Pulse Energy Sensors

Contact a product expert

Inquiry about J-50MT-10KHZ Energy Sensor (1110574). A Coherent specialist will reach out within one business day.

* Required field

  • 190 nm to 2.1 µm spectral range
  • 50mm diameter active area
  • 500 µJ - 1J energy range
  • 10000 pps repetition rate operation
  • ISO 17025 accredited

Description

Pyroelectric energy sensor with MaxBlack coating for measuring laser pulses from 500 µJ - 1J at up to 10000 pps.

The J-50MT-10KHZ energy sensor is terminated in a SmartProbe DB25 cable and is directly compatible with LabMax-TOP and LabMax-Pro SSIM meters.

USB-direct (PN 1191447) and RS232-direct (PN 1191433) models are available.

A large heatsink (PN 1123432) is available to extend the energy and repetition rates of EnergyMax sensors by increasing the average power capability.

Specifications

Key technical parameters. For full electrical, optical and environmental ranges, refer to the datasheet.

Product Type Pulse Energy Sensors
Active Area (mm) 50 mm
Key Feature 190 nm to 2.1 µm spectral range;50mm diameter active area;500 µJ - 1J energy range;10000 pps repetition rate operation;ISO 17025 accredited
Technical Specifications Cable Type: J DB-25 Detector Coating: Diffuse Metallic Energy Range: 500 µJ - 1 J Wavelength Range: 190 nm to 2100 nm Noise Equivalent Energy: <16 µJ Maximum Average Power (watts): 20 Maximum Pulse Width (microseconds): 1.7 Maximum Energy Density (millijoules per square centimeter): 500 (at 1064 nm, 10 ns) Diffuser: No Calibration Uncertainty (%)(k=2): ±2 Energy Linearity (%): ±3 Calibration Wavelength (nanometers): 1064 Cable Length (meters): 2.5