J-50MB-HE Energy Sensor
1 mJ to 2J pulse energy sensor, rep. rate up to 300 pps, MaxBlack coating with 0.19 to 12 µm spectral range, 50 mm diameter active area.
- Part Number
- 1110573
- Product Type
- Pulse Energy Sensors
Contact a product expert
Inquiry about J-50MB-HE Energy Sensor (1110573). A Coherent specialist will reach out within one business day.
* Required field
- 190 nm to 12 µm spectral range
- 50mm diameter active area
- 1 mJ to 2J energy range
- 300 pps repetition rate operation
- ISO 17025 accredited
Description
Pyroelectric energy sensor with MaxBlack coating for measuring laser pulses from 1 mJ to 2J at up to 300 pps.
The J-50MB-HE energy sensor is terminated in a SmartProbe DB25 cable and is directly compatible with FieldMaxII-TOP, FieldMaxII-P, LabMax-TOP, and LabMax-Pro SSIM meters.
USB-direct (PN 1191444) and RS232-direct (PN 1191432) models are available.
A large heatsink (PN 1123432) is available to extend the energy and repetition rates of EnergyMax sensors by increasing the average power capability.
Specifications
Key technical parameters. For full electrical, optical and environmental ranges, refer to the datasheet.
| Pulse Repetition Rate | 300 Hz |
|---|---|
| Wavelength (μm) | 190 nm to 12 µm |
| Product Type | Pulse Energy Sensors |
| Active Area (mm) | 50 mm |
| Key Feature | 190 nm to 12 µm spectral range;50mm diameter active area;1 mJ to 2J energy range;300 pps repetition rate operation;ISO 17025 accredited |
| Technical Specifications | Cable Type: J DB-25 Detector Coating: MaxBlack Energy Range: 1 mJ - 2 J Wavelength Range: 190 nm to 12 µm Noise Equivalent Energy: <33 µJ Maximum Pyroelectric Rep. Rate (pulses per second): 300 Maximum Average Power (watts): 10 Maximum Pulse Width (microseconds): 17 Maximum Energy Density (millijoules per square centimeter): 500 (@1064nm, 10ns) Diffuser: No Calibration Uncertainty (%)(k=2): ±2 Energy Linearity (%): ±3 Calibration Wavelength (nanometers): 1064 Cable Length (meters): 2.5 |