calcActive())">
Laser Measurement Instruments
PM3K Water-Cooled Laser Power Sensor
PM3K Water-Cooled Laser Power Sensor. Detailed specifications are listed below.
- Part Number
- 1098462
Contact a product expert
Inquiry about PM3K Water-Cooled Laser Power Sensor (1098462). A Coherent specialist will reach out within one business day.
* Required field
Description
PM3K Water-Cooled Laser Power Sensor.
Official catalog photograph represents the PM1K/PM3K/PM5K sensor family. Water fittings are included. Intermittent operation depends on beam profile and coating condition; monitor closely for coating damage.
Specifications
Key technical parameters. For full electrical, optical and environmental ranges, refer to the datasheet.
| Wavelength (μm) | 0.25 to 11 µm |
|---|---|
| Active Area (mm) | 50 mm |
| Technical Specifications | Wavelength Range: 0.25 to 11 µm Power Range: 100 to 3000 W Maximum Intermittent Power (<5 min.): 5000 W Resolution: 1 W Maximum Power Density: 1 to 2.5 kW/cm²; beam size, profile, power and water flow dependent Maximum Energy Density: 600 mJ/cm² at 1064 nm, 10 ns Response Time: 30 s Detector Coating: Broadband Calibration Uncertainty (k=2): ±3% Calibration Wavelength: 1070 nm Cooling Method: Water-cooled Cable Type: PM DB-25 Cable Length: 2 m Meter Compatibility: LabMax-Pro, LabMax-TOP/TO, FieldMaxII, FieldMate Cooling Water Flow: 0.5 to 4 gallons/minute, depending on power Cooling Water Pressure: 3 to 40 PSI, depending on flow |