Datacenter and Communications

10GBASE-SR/SW 400m SFP+ Extended Temperature Optical Transceiver

FTLX8574D3BNL extended Temperature 10 Gb/s SFP+ transceivers are compliant with SFF-84311, SFF-84322, IEEE 802.3-2012 10GBASE-SR/SW3 and 10G Fibre Channel 1200-Mx-SN-I4. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-84725. The FTLX8574D3BNL is a limiting module i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer, as recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The optical transceiver is compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details. For details of our compliance standards, click here .
Part Number
FTLX8574D3BNL
Product Type
Transceiver
Data Transfer Rate (G)
≤10G
Form Factor
SFP+

Contact a product expert

Inquiry about 10GBASE-SR/SW 400m SFP+ Extended Temperature Optical Transceiver (FTLX8574D3BNL). A Coherent specialist will reach out within one business day.

* Required field

Description

FTLX8574D3BNL extended Temperature 10 Gb/s SFP+ transceivers are compliant with SFF-84311, SFF-84322, IEEE 802.3-2012 10GBASE-SR/SW3 and 10G Fibre Channel 1200-Mx-SN-I4. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-84725. The FTLX8574D3BNL is a limiting module i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer, as recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The optical transceiver is compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details. For details of our compliance standards, click here .

Specifications

Key technical parameters. For full electrical, optical and environmental ranges, refer to the datasheet.

Protocol CPRI, Fibre Channel, Gigabit Ethernet
Receiver PIN
Operating Distance (km) 0.4
Media Type Duplex MMF
Transmitter VCSEL
Voltage Supply (V) 3.3
Wavelength (by band type) None
Wavelength (nm) Band 850
Product Type Transceiver
Connector LC
Diagnostics Digital
Data Rate (Gb/s) 10.5
Data Transfer Rate (G) ≤10G
Low End Case Temperature °C -5
High End Case Temperature °C 85
Form Factor SFP+