End of Life Notice: This product will be phased out after March 2009; it is replaced by LabMax-TOP w/GPIB.
Measures power levels from 100 µW to 10 kW; energy levels from 100 fJ to 300J.
End of Life Notice: This product will be phased out after December 2008; it is replaced by LabMax-TO.
This meter provides an economical way to perform laser power measurements and laser tuning.
Large, bright, backlit LCD display
Digital accur
....
Large, bright, backlit LCD display
Digital accur
....
For thermal, pyroelectric, and optical sensors; measures energy up to 300 pps.
End of Life Notice: This product will be phased out after December 2008; it is replaced by LabMax-TOP.
For thermal and optical sensors; displays beam position.
For thermal, pyroelectric, and optical sensors; measures energy up to 10000 pps.
Compatible
....
LaserCheck is an inexpensive, hand-held laser power meter that displays measurements on a built in LCD screen.
Provides laser, diode and fiber-optic power measurements from 10 nW to 5 kW.
Power & energy system for CW, single-pulse & repetitive-pulse measurements.
For thermal, pyroelectric, and optical sensors; measures energy up to 10000 pps.
Compatible
....
For thermal and optical sensors; displays beam position.
For thermal, pyroelectric, and optical sensors; measures energy up to 300 pps.
Large, bright, backlit LCD display
Digital accur
....
Large, bright, backlit LCD display
Digital accur
....
This meter provides an economical way to perform laser power measurements and laser tuning.
Provides laser, diode and fiber-optic power measurements from 10 nW to 5 kW.
LaserCheck is an inexpensive, hand-held laser power meter that displays measurements on a built in LCD screen.
Power & energy system for CW, single-pulse & repetitive-pulse measurements.
Measures power levels from 100 µW to 10 kW; energy levels from 100 fJ to 300J.
End of Life Notice: This product will be phased out after March 2009; it is replaced by LabMax-TOP w/GPIB.
End of Life Notice: This product will be phased out after December 2008; it is replaced by LabMax-TOP.
End of Life Notice: This product will be phased out after December 2008; it is replaced by LabMax-TO.
Coherent's diverse line of laser energy sensors cover nearly every energy, wavelength, and speed range necessary for most application.
Chart provides access to pyroelectric performance characteristics.
Overview chart provides quick comparison of our pyroelectric sensors.
Two digital and five standard analog cameras meet most needs; others also available.
Get cross-sectional profiles or 2D/3D image plots in real time up to 5 Hz.
Wavelengths from 10-2200 nm; beams from tens of microns to 30 by 40 mm.
Simplifies setup & analysis of beams, due to increased optical dynamic range.
The New LaserCam™-HR-InGaAs and LaserCam™-HR-UV joining already successful LaserCam-HR camera.
Allow quick changes to other wavelengths or divergences to suit your needs.
Measures the wavelength of both CW and pulsed lasers of any repetition rate.
Wavelength measurement of pulsed and CW laser sources from 450 nm to 1,000 nm.
Used to examine the fine details of the line spectra of CW lasers.
Measures the wavelength of both CW and pulsed lasers of any repetition rate.
Wavelength measurement of pulsed and CW laser sources from 450 nm to 1,000 nm.
Sets standard for high rep. rate, pulsed laser energy measurements.
Provides laser, diode and fiber-optic power measurements from 10 nW to 5 kW.
Compact power instrument compatible with all of our PowerMax™ probes.
Extend EnergyMax energy and/or repetition rate ran
....
This item is the rechargeable battery pack
....
The Coherent J-Power is a compact sensor adapter t
....
The Thermal SmartSensor Adapter provides compatibili
....
Allows use of visible and infrared sensors at 5 and 3 watts, respectively.
Damage protection for J25 or J50 probes, they diffuse the laser beam.
Soft carrying case for FieldMate
For protection of your sensors when measuring unknown beams.
Connect common fiber terminations to threads around entrance apertures.
0.19 µm to 3.0 µm
Coherent Power Meters should be used only with the A
....