The Monaco diode-pumped femtosecond industrial laser provides a 60 µJ/pulse at 1 MHz to enable current and future throughput requirements in the materials processing and microelectronics space.
The Monaco’s diode-pumped MOPA architecture is designed for high-uptime and 24/7 applications. The design also offers the energy and repetition rate agility required to cover a wide range of ME and MP applications.
The Monaco laser provides a 60 μJ/pulse at 1 MHz to enable current and future throughput requirements in the materials processing and microelectronics space.
Homogeneous materials such as glass and metals, as well as complex, layered-structure processing for the FPD and mobile markets are readily addressed.
The Monaco is housed in a single box that integrates all optical elements and control electronics. This small footprint accommodates easy integration into laser-based production tools.
The standard pulsewidth of the Monaco is <400 fs. A variable pulsewidth option, however, enables tuning out to >10 ps.
Reliability from the Monolithic Design: The laser head is machined from a single block of stress-relieved aluminum. This monolithic structure ensures an optical alignment that is maintained during the life of the laser. This head encases all of the optical, electrical, and control elements. There are no umbilicals, no outmoded wiring harnesses between power supply boards, nor remotely located pump diodes – all of which could create potential failure points in the system.
SoloboardTM: Contains all optical elements including pump diodes. No fiber coupling in the umbilical eliminates possible failure points. Additionally, all interfaces to the laser are through the SoloBoard electronics board located in the Monaco head.
We Bring the Cleanroom to You: The laser is built in a class 1000 cleanroom. The cleanliness, however, is maintained in the field via the PureFemtoTM active cleaning of the laser head. We believe cleanliness of the laser head is just as important for fs system longevity, as it is for UV lasers.
Better Mounting for Stability: A three-point kinematic mount is the standard mounting interface on the Monaco. The technique is dramatically superior over common flat-plate mounting schemes. The laser is thermally isolated from the rest of the laser tool, thus ensuring stable operation within a broad thermal cycle range inside a laser tool (10°C to 30°C). Additionally, warm up time (<15 min from standby; <45 min from cold start) is minimized in the Monaco due to this thermal isolation. Lastly, laser placement repeatability is maximized with the three-point mount. This means minimal downstream beam-train alignment is required when swapping lasers.
Tested Like No Other fs Laser: Highly Accelerated Life Testing (HALT) protocol was implemented during development to validate the overall design. Commonly used in the consumer electronics, automotive, and aerospace industries, HALT testing determines the conditions that make the laser fail. Based on HALT results, design improvements are made throughout development cycles to ensure the laser can withstand the harshest shipping and use environments that the laser may see.
Throughout production, Highly Accelerated Stress Screening (HASS) is employed. HASS identifies possible manufacturing weaknesses in individual lasers. Additionally, the HASS test simulates a 3000-mile shipment on a flatbed truck. This process dramatically reduces out-of-box failure rates and failures associated with mechanical craftsmanship.
Coherent has locations across the globe that are available to provide support for any product, service or inquiry.
5100 Patrick Henry Drive
Santa Clara, CA 95054 USA
Please Read Before Continuing
Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.